Atlantic Fasteners - Tech help

Thread and bolt gauges


	Inch/metric bolt gauge - plastic Includes holes for determining bolt diameters, studs for sizing nuts, inch/metric ruler on side, metric nut size gauge, molded inch and metric thread grooves and pitch/diameter chart. part # - GAGENB $7.50*
	Inch thread gauge - plastic Use for machine screws, bolts, wood and self-tapping screws, standard size rivets and common cotter pins to determine diameters up to 5/16” and corresponding pitch. Pitch holes are threaded; size holes are not, allowing for easy sliding of fasteners. Also shows drill and tap sizes, and decimal diameter equivalents. Length gauge at top. part # - XMSC $7.50*
	*Metric thread gauge - plastic $7.50** Lets you determine metric and equivalent inch diameters up to 12 mm (.472”). Also includes metric thread pitch holes. Pitch holes are threaded; diameter holes are not, allowing for easy sliding of fasteners. Length gauge on side. part # - BPSC $7.50*
	Metric thread gauges - steel Heavy-gauged steel screw checkers. Satin-chrome plated. Sold as a set only. One size is for M2 – M7; other for M8 – M14 diameters. They show length in millimeters, metric tap series, ISO preference rating, diameter in millimeters, pitch in millimeters, clearance drill size, tap drill size, basic diameter in inches. Pitch holes are threaded; size holes are not, allowing for easy sliding of fasteners. part # BMSC $55/set*

	SPS/Unbrako Separate charts for inch and metric Includes loads of data such as recommended seating torque, tensile strength, dimensions, and drill and tap sizes for socket head cap screws, flat and button head socket cap screws, socket set screws, socket head shoulder screws, and dryseal pressure plugs (inch chart only). Inch screw size up to 3” (48 mm) diameter; pipe size to 2”. part # for metric - SX01METRIC $5.00*
	part # for inch - SX01INCH $5.00*
	Holo-Krome Separate charts for inch and metric Shows more tips and dimensional data, especially for socket set screws, than the SPS charts above. Otherwise, similar data. Inch chart includes low head socket cap screws. Metric chart excludes low heads, socket shoulder screws and pressure plugs. Set screws up to 1” diameter (24 mm). Pressure plugs to 1 ¼”. Socket head products to 1 ½” (36 mm) diameter, except shoulder screws, up to ½”. part # for metric - KX01METRIC $5.00*
	part # for inch - KX01INCH $5.00*

*In U.S. dollars, plus shipping & handling